| HYUNDAI 33800-4A150 injector | Preload class B GB:720 N; ra - max.:1 mm; Calculation factor f:1.43; db - min.:146 mm; Da - max.:169 mm; D1:163.71 mm; d2:151.3 mm; r3,4 - min.:0.6 mm; da - min.:146 mm; Preload class A GA:240 N; |
| HYUNDAI 3380027000 injector | T1:155 mm; J:510 mm; H:97 mm; B:49,2 mm; Width (mm):49,2; H2:186 mm; H1:44 mm; N:15 mm; Bolt (G):M12; L:570 mm; |
| HYUNDAI 338004a150 injector | C:40 mm; d:130 mm; E:212 mm; Brand:Timken; Bore Diameter (mm):130; D:230 mm; Bearing number:130RF02; F:148 mm; B:40 mm; r max:2,5 mm; |
| HYUNDAI 3380027000 injector | Dimension B:4.7500 in; Dimension S1:0.7813 in; Dimension F:0.5000 in; Pin Dia BS:3/8; Weight W:0.70 lb; Diameter G:0.4063 in; Distance J:1.6250 in; Dimension L:2.7500 in; Dimension C:1.8125 in; Basic Static Radial Load Rating Co:1750 lbf; |
| HYUNDAI 338004a160 injector | Weight:0,68 Kg; Basic dynamic load rating (C):27 kN; Width (mm):13; D:180 mm; Brand:ISB; B:13 mm; a:2,5 mm; Bore Diameter (mm):150; d:150 mm; b:1,6 mm; |
| HYUNDAI 33800-4A170 injector | Support Type:Four-Bolt Plummer Bl; Cor - Static Load Rating:305066 lbf; Dimension M:9.5 in; Bearing - Housing - Seal:MSE700BRHRSS; Housing Width:8.7 in; Weight:557 lb; Dimension H:10.748 in; Dimension H2:21.5 in; Seal Type:Viton Single Lip; Cr - Dynamic Load Rating:208398 lbf; |
| HYUNDAI 338004a350 injector | d:177,8 mm; Mass:9.05 kg; Max operating temperature, Tmax:120 °C; Bore Diameter (mm):177,8; C:41,275 mm; Weight / Kilogram:9.521; rs min:3.56 mm; Characteristic outer ring frequency, BPF0:13.72 Hz; Characteristic rolling element frequency, BSF:11.37 Hz; Nlim (grease):1,200 rpm; |
| HYUNDAI 33800-21900 injector | Weight:0,057 Kg; Fw:22 mm; Bore Diameter (mm):22; Ew:32 mm; Bc:30 mm; (Grease) Lubrication Speed:14000 r/min; Basic static load rating (C0):51,3 kN; Brand:Timken; Basic dynamic load rating (C):41,8 kN; Bearing number:K22X32X30H; |