| HYUNDAI 3380027900 injector | C:12 mm; cage material:Steel; Basic static load rating (C0):5,05 kN; Outside Diameter:1.654 Inch | 42 Mill; UNSPSC:31171504; Width (mm):12; bearing material:High Carbon Chrome S; maximum rpm (grease):18000 rpm; Outer Diameter (mm):42; Manufacturer Name:NTN; |
| HYUNDAI 33800-4A170 injector | Support Type:Four-Bolt Plummer Bl; Cor - Static Load Rating:305066 lbf; Dimension M:9.5 in; Bearing - Housing - Seal:MSE700BRHRSS; Housing Width:8.7 in; Weight:557 lb; Dimension H:10.748 in; Dimension H2:21.5 in; Seal Type:Viton Single Lip; Cr - Dynamic Load Rating:208398 lbf; |
| HYUNDAI 33800-4A150 injector | Preload class B GB:720 N; ra - max.:1 mm; Calculation factor f:1.43; db - min.:146 mm; Da - max.:169 mm; D1:163.71 mm; d2:151.3 mm; r3,4 - min.:0.6 mm; da - min.:146 mm; Preload class A GA:240 N; |
| HYUNDAI 338004a300 injector | l5:15 mm; d2:71 mm; l4 max.:148 mm; Angle:17 °; d:30 mm; d3:40 mm; C1:27 mm; Basic dynamic load rating (C):64 kN; Bore Diameter (mm):30; h1:110 mm; |
| HYUNDAI 33800-21900 injector | Weight:0,057 Kg; Fw:22 mm; Bore Diameter (mm):22; Ew:32 mm; Bc:30 mm; (Grease) Lubrication Speed:14000 r/min; Basic static load rating (C0):51,3 kN; Brand:Timken; Basic dynamic load rating (C):41,8 kN; Bearing number:K22X32X30H; |
| HYUNDAI 338004a350 injector | d:177,8 mm; Mass:9.05 kg; Max operating temperature, Tmax:120 °C; Bore Diameter (mm):177,8; C:41,275 mm; Weight / Kilogram:9.521; rs min:3.56 mm; Characteristic outer ring frequency, BPF0:13.72 Hz; Characteristic rolling element frequency, BSF:11.37 Hz; Nlim (grease):1,200 rpm; |
| HYUNDAI 338004a150 injector | C:40 mm; d:130 mm; E:212 mm; Brand:Timken; Bore Diameter (mm):130; D:230 mm; Bearing number:130RF02; F:148 mm; B:40 mm; r max:2,5 mm; |
| HYUNDAI 338004A160 injector | D:145 mm; (Oil) Lubrication Speed:5 100 r/min; Weight:0,816 Kg; rn:0,5 mm; Width (mm):20; Dx:152 mm; r0 max.:0,6 mm; f:1,7 mm; D1:142,6 mm; D2:150,7 mm; |