| No. | Brand | H | D | G | K | f | U | B | S |
| 7204CTRSULP3 | NSK | - | 212.725 mm | - | - | - | - | 66.675 mm | - |
| 7903CTRSULP3 | NSK | - | 55 mm | - | - | - | - | - | - |
| 7005A5TRQUMP3 | NSK | - | 80.0000 mm | - | - | - | - | 38.10 mm | - |
| 7905CTRSUMP3 | NSK | - | 250.0000 mm | - | - | - | - | 55.00 mm | - |
| 7000A5TRDUMP3 | NSK | - | 440.0000 mm | - | - | - | - | 84.00 mm | - |
| 7905A5TRSULP3 | NSK | - | - | - | - | - | - | - | - |
| 7002A5TRDUMP3 | NSK | 422.275 mm | - | - | - | - | - | - | 4.763 mm |
| 7006A5TRQUMP3 | NSK | 127 mm | - | - | - | - | - | 59.531 mm | 0.794 mm |
| 7203A5TRDULP3 | NSK | - | 1220 mm | - | 15 mm | - | - | 365 mm | - |
| 7203A5TRSUMP3 | NSK | - | 130.0000 mm | - | - | - | - | 18.00 mm | - |
| 7002A5TRSUMP3 | NSK | - | - | - | - | - | - | 33 mm | - |
| 7944CTRDUMP3 | NSK | - | - | - | - | - | - | - | - |
| 7003CTRDULP3 | NSK | - | - | - | - | - | - | 30.924 mm | - |
| 7948A5TRDULP3 | NSK | - | 140 mm | - | - | - | - | 33 mm | - |
| 7940CTRDUDLP3 | NSK | - | 72.0000 mm | - | - | - | - | - | - |
| 7956CTRDULP3 | NSK | - | 62 mm | - | - | - | - | - | - |
| 7934A5TRSULP3 | NSK | - | 340 mm | - | 9 mm | - | - | 114 mm | - |
| 7036A5TRSUMP3 | NSK | 192.484 mm | - | - | - | - | - | - | 4.763 mm |
| 7956A5TRDUMP3 | NSK | 354 mm | 1440 mm | - | - | - | - | 142 mm | - |
| 7040CTRSULP3 | NSK | - | 32.0000 mm | - | - | - | - | 20.00 mm | - |
| 7934CTRSUMP3 | NSK | - | 60 mm | - | - | - | - | 40 mm | - |
| 7205A5TRSULP3 | NSK | - | 90.0000 mm | - | - | - | - | 10.00 mm | - |
| 7201CTRDULP3 | NSK | - | - | - | - | - | - | - | - |
| 7948A5TRSUMP3 | NSK | - | 140.0000 mm | - | - | - | - | 16.00 mm | - |
| 7005A5TRSUMP3 | NSK | 41.3 mm | 60 mm | - | - | - | - | 9 mm | - |
| 55BNR10STSUELP3 | NSK | - | - | - | - | - | - | - | - |
| 30TAC62BDFC10PN7A | NSK | - | 720 mm | - | - | - | - | 167 mm | - |
| 7036A5TRSULP3 | NSK | - | 120.0000 mm | - | - | - | - | 87.00 mm | - |
| 7903CTRDUMP3 | NSK | - | 28 mm | - | - | - | - | 11.5 mm | - |
| 7948CTRSULP3 NSK Super Precision Bearings | Cap bolt recommended tightening torque:298.3 N·m; Da:140 mm; S:4.763 mm; RG:3/8 NPT; Pa:7.83 kN; Mass pillow block:21.8 kg; P120°:49.8 kN; da:69.85 mm; H2:31.75 mm; L:330.2 mm; Housing:SSAFS 516; ba:33.337 mm; Cap bolt, SAE grade:8; Stabilizing ring:SR-16-13; P150°:44.5 kN; P60°:138 kN; A2:133.35 mm; h:31.75 mm; Cap bolt:2 x 5/8-11 UNC; P90°:82.7 kN; |
| 7948A5TRSULP3 NSK Super Precision Bearings | P60°:178 kN; h:40.922 mm; A1:120.65 mm; Stabilizing ring:2 x 38151-26; Da:200 mm; A2:231.775 mm; H:244.475 mm; RG:3/8 NPT; R2:31.75 mm; ba:51.594 mm; Cap bolt, SAE grade:8; H1:125.425 mm; PG:1/4 NPT; R1:73.025 mm; Cap bolt:5/8-11 UNC; Housing:SSAFS 026 KA; Cap bolt recommended tightening torque:298.3 N·m; L:419.1 mm; Taconite seal:TER 117; Initial grease fill:232.47 g; |
| 7901CTYNSUMP3 NSK Super Precision Bearings | Sealed Speed Rating n3:4300 rpm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; D:110.0000 mm; Basic Static Radial Load Rating Co:38000 N; B:27.00 mm; Grease Speed Rating n1:6300 rpm; d:50.000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Accessories:Seal & Snap-Ring; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:61800 N; |
| 7001A5TRSULP3 NSK Super Precision Bearings | d:17.000 mm; Accessories:Two Shields & Snap-R; B:12.00 mm; Fillet Radius ra:0.64 mm; Grease Speed Rating Open/Shielded n1:14000 rpm; Basic Static Radial Load Rating Co:6000 N; Basic Dynamic Radial Load Rating C:8970 N; Oil Speed Rating Open/Shielded n2:17000 rpm; D:40.0000 mm; |
| 7903CTRSULP3 NSK Super Precision Bearings | da min.:38.5 mm; b1:3.9 mm; da max.:39.8 mm; C:20 mm; Basic dynamic load rating C:80 kN; Material constant KM:330; Da min.:48.5 mm; Basic static load rating C0:400 kN; r1 min.:0.6 mm; d:35 mm; rb max.:1 mm; D:55 mm; ra max.:0.6 mm; Specific static load factor K0:500 N/mm²; Design (sliding contact surface combination):Steel/steel, heavy-d; Da max.:50.9 mm; dk:47 mm; Specific dynamic load factor K:100 N/mm²; |
| 7944CTRSULP3 NSK Super Precision Bearings | B1:69 mm; D1:mm; Weight:0 min-1; D:180 mm; B2 B Dynamic (Cr):mm; d:110 mm; Limiting speed for lubrication with:0 min-1; Pu:501 kN; Oil:91.520 kN; Static (Cor):82 mm; Grease:839 kN; |
| 7006A5TRQUMP3 NSK Super Precision Bearings | B:59.531 mm; L:244.475 mm; H2:38.1 mm; Mass bearing unit:6.12 kg; H:127 mm; J min.:193.675 mm; s:29.766 mm; Attachment bolt diameter G:15.875 mm; S:0.794 mm; J max.:203.2 mm; Limiting speed:4500 r/min; H1:63.5 mm; da:55.563 mm; A:66.675 mm; Basic dynamic load rating C:125 kN; |
| 7205CTRDULP3 NSK Super Precision Bearings | Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:124000 N; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; B:49.20 mm; Basic Static Radial Load Rating Co:110000 N; Accessories:One Seal & Snap-Ring; d:85.000 mm; Oil Speed Rating n2:3600 rpm; D:150.0000 mm; |
| 7040CTRSULP3 NSK Super Precision Bearings | D:32.0000 mm; Basic Static Radial Load Rating Co:6400 N; Fillet Radius ra:0.64 mm; Oil Speed Rating n2:23000 rpm; Grease Speed Rating n1:18000 rpm; d:12.000 mm; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:10100 N; B:20.00 mm; |
| 7932CTRSUMP3 NSK Super Precision Bearings | r1,2 min.:7.5 mm; D:920 mm; K:12 mm; Calculation factor Y1:2.3; B2:85 mm; da max.:675 mm; Basic dynamic load rating C:9596 kN; Fatigue load limit Pu:980 kN; Mass bearing + sleeve:880 kg; Basic static load rating C0:16000 kN; d2 ≈:675 mm; db min.:589 mm; d1:530 mm; Da max.:888 mm; Ba min.:20 mm; Calculation factor e:0.3; Calculation factor Y2:3.4; B5:110 mm; D1 ≈:809 mm; Reference speed:340 r/min; |
| 7003A5SN24TRDULP3 NSK Super Precision Bearings | B:22.00 mm; Basic Static Radial Load Rating Co:12200 N; d:60.000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:6700 rpm; Basic Dynamic Radial Load Rating C:31200 N; Grease Speed Rating n1:5600 rpm; D:110.0000 mm; |
| 7040A5TRSUMP3 NSK Super Precision Bearings | a:15 mm; α:124 °; Tolerance shaft:e7; h:212.5 mm; Coefficient of friction µ min.:0.08; B:300 mm; Mass bushing:18.2 kg; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ max.:0.15; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; Specific static load factor K0:45 N/mm²; d:210 mm; D:230 mm; Permissible sliding velocity v min.:0 m/s; |
| 7004A5SN24TRDUMP3 NSK Super Precision Bearings | Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:4800 rpm; Basic Static Radial Load Rating Co:69500 N; Oil Speed Rating Open/Shielded n2:5600 rpm; Fillet Radius ra:2.00 mm; B:35.00 mm; D:150.0000 mm; d:60.000 mm; Sealed Speed Rating n3:3100 rpm; Basic Dynamic Radial Load Rating C:108000 N; |
| 7036A5TRSUMP3 NSK Super Precision Bearings | P180°:42.3 kN; S:4.763 mm; L:349.25 mm; J max.:295.275 mm; h:38.1 mm; Taconite seal:TER 187; Appropriate attachment bolt size G:0.625 in; Initial grease fill:141.75 g; N1:19.05 mm; RG:3/8 NPT; A1:98.425 mm; A2:206.375 mm; Stabilizing ring:SR-18-15; R2:27.781 mm; Housing:FSAF 518; H2:41.275 mm; Cap bolt, SAE grade:5; R1:60.325 mm; Da:160 mm; H:192.484 mm; |
25TAC62BSUC10PN7B NSK Super Precision Bearings Video
NSK Precision angular contact ball bearing ...
Hot Ball Bearing - we are the best Ball Screw Support Bearings supplier & NSK Precision angular contact ball bearing 25TAC62BSUC10PN7B NSK P4 CNC
NSK 25TAC62BSUC10PN7B Ball Screw Support Bearings
NSK Inch series Ball Screw Support bearings are designed specifically to provide maximum axial rigidity and improved feeding accuracy for use with precision
NSK 25TAC62BSUC10PN7B ball screw support bearings
NSK 25TAC62BSUC10PN7B bearing, Ball Screw Support Bearings, Open type, Dimensions: 25mm x 62mm x 15mm, Limiting Speeds:5200
25TAC62BSUC10PN7B – NSK Ball Screw Support Bearing
Brand: NSK Original: Japan Availability: In Stock Dimensions (mm) Contact Angle Weight (kg) Brand d D B 25 62 15 60° 0.252
Buy 25TAC62BSUC10PN7B NSK Ballscrew Bearing
NSK® 25TAC62CSUHPN7C Bearing (Replaces 25TAC62BSUC10PN7B) ... Buy NSK® 25TAC62CSUHPN7C bearings for machinery applications from the CNC Specialty Store. These NSK® bearings 25TAC62CSUHPN7C are commonly used in ballscrew support bearing applications
NSK Precision Ball Screw Support Bearing ... - eBay
Find many great new & used options and get the best deals for NSK Precision Ball Screw Support Bearing 25TAC62BSUC10PN7B at the best online prices at
NSK 25TAC62BSUC10PN7B Ball Screw Support Bearing
This NSK single-row angular contact thrust ball bearing with a 60-degree contact angle, open design, and polyamide resin cage is designed to support ball screw units in precision machine tool applications. ... Lower frictional torque than cylindrical or tapered roller bearings give
25TAC62BSUC10PN7B - NSK BSB - Quality Bearings Online
Product: 25TAC62BSUC10PN7B Ball Screw Support Bearing | Brand: NSK | Size: 25x62x15mm | In Stock | Same Day Despatch | All Orders Shipped via DHL